Thursday, March 31, 2011

Star Wars Figure of the Day: Day 1,512: Clone Trooper

CLONE TROOPER Battlefront II Clone Pack
30th Anniversary Collection Diamond/Previews Exclusive
Item No.:
Asst. 87561 No. 87466
Manufacturer: Hasbro
Number: n/a
Includes: Blaster, Helmet, 5 more figures
Action Feature: n/a
Retail: $39.99
Availability: November 2007
Appearances: Star Wars: Battlefront II

Bio: These genetically engineered soldiers are designed to fight the enemy with unrelenting and unwavering intensity until their mission is complete. (Taken from the figure's box.)

Image: My floor.

Commentary: If you're a fan of all things 501st, this Clone Trooper will be something you'll want to track down. It's based on the Combat Engineer Clone Trooper from early 2007, which itself was based on the Evolutions Clone Trooper from 2005. It has a swivel waist and a removable helmet, but other than that it's pretty much the same basic design as most Clone Troopers from 2005 to the present. SInce it is the Evolutions body type, there's as strap on the left bicep which you don't normally see on "plain" clones. There's a fair amount of weathering unique to this figure, and of course the 501st Legion markings in blue which, sadly, are rarely the same shade of blue on multiple figures. If you're looking to build an army I'd say this is a good figure to grab, but sadly it's in a big boxed set of six figures that'll cost you a few bucks. If you want to army-build a lot of different clones, it may be worth your while to grab a bunch of the boxed set. It's certainly a nice enough looking figure but with Saga Legends and other versions of the 501st readily available, odds are you'll be fine after only getting one or two of this particular release.

Collector's Notes: This figure (out of the package) can be had for about seven bucks. The boxed set of six figures is closer to $50. It's also worth noting a packaging variation-- Diamond/Previews had this set in 30th Anniversary-style package, while Toys "R" Us got a very short run of it in Legacy Collection blue-and-white. The figures are the same.

--Adam Pawlus


Day 1,512: March 31, 2011

Wednesday, March 30, 2011

Star Wars Figure of the Day: Day 1,511: Emperor Palpatine

EMPEROR PALPATINE Yet Another Repaint
The Legacy Collection Previews Exclusive
Item No.:
No. 87924
Manufacturer: Hasbro
Number: n/a
Includes: Cane, lightsaber, cloak, 5 other figures
Action Feature: n/a
Retail: $34.99
Availability: December 2008
Appearances: Crimson Empire comic books

Bio: Accompanied by Darth Vader and surrounded by Royal Guardsmen, Palpatine visits Yinchorr to observe students at the training ground. (Taken from the figure's box.)

Image: My desk.

Commentary: Since its debut in 2005, this Emperor Palpatine sculpt has had a few redecorations and revisions. This one is, I believe, one of the better releases. The skin tone is nice and pale, the hair is painted, but the personality is a little off for the scenario. In the comics we didn't see Palpatine in a murderous teeth-baring rage, but hey, it's still a slightly improved version of the Revenge of the Sith figure. He's super-articulated and still interacts with the Sith Lightning from the Evolutions Sith Lords set. The figure has no problems standing or sitting, the detail is great, really the only downer is that the hood of the cloak hangs on the figure's head a little strangely. This was present in nearly all releases of this mold, except the 2009 Empire Strikes Back version that incorporates a plastic hood. This figure is of that "just different enough to make you mad" variety, it's more unique than just another variation but it's not so different that you would likely seek it out of its own merits. If you don't have any version of the "Evolutions" Emperor, this is the best one to get with the original head sculpt-- but if you have any of them, they're really all pretty much the same with different skin tones.

If you buy this figure in the boxed set, the main reason to get it are for the trainee guards-- this is just a bit of an afterthought, and Vader's really no different from his other releases of this mold. The set is pretty good, particularly if you like the comics.

Collector's Notes: This set did not prove to be a big seller, and like a few other 2008-era boxed set exclusives, it did show up at other venues for pretty low prices. Today, it should run you anywhere between $20 and $40, which is quite a range.

--Adam Pawlus


Day 1,511: March 30, 2011

Tuesday, March 29, 2011

Star Wars Figure of the Day: Day 1,510: Jesse

JESSE Clone Trooper
The Clone Wars Figures with Vehicles
Item No.:
Asst. 94737 No. 28039
Manufacturer: Hasbro
Number: n/a
Includes: Blaster, stand, bike
Action Feature: Bike has rolling wheels
Retail: $16.99
Availability: January 2011
Appearances: The Clone Wars

Bio: Clone trooper Jesse pilots a BARC speeder bike to track down General Grievous in the Saleucami wetlands. The one-man bikes are named for the Biker Advanced Recon Commandos who first used them. On the swift, maneuverable BARC speeders, Jesse and his team can cover a lot of ground as they search for the cyborg general. (Taken from the figure's packaging.)

Image: In front of the Mandalorian Battle Pack's backdrop.

Commentary: Here's an interesting one. Clone Trooper Jesse isn't quite just a repaint, but is actually a figure that incorporates the bulk of the Stone-style sculpting with new hips. The figure has no ankle joints, but he does have ball-jointed hips and is the very first "new sculpt" Trooper to feature them. The figure includes some grey and blue details from the episode and is sculpted pretty darned nicely. The enhanced articulation allows him to sit on a bike without ruining his hip joints-- this might not seem like much, but it's really important given that very few clones can actually do this. (And it only took Hasbro about five years to add this joint in for biker clones.) It's a welcome change, and I hope they make sure they use it from here on out so it doesn't ruin the joint permanently on other, non ball-jointed hip figures. I like the Republic logo on the helmet because it looks cool, but it's pretty impractical-- I mean, it's a target right over his brain. Still, it's neat to look at and arguably Hasbro's best-engineered regular Clone figure in the animated line for use on vehicles. I really hope Hasbro uses this body for many other figures, especially plain white Clones. You know, the title character of the show... the ones that don't get a lot of figures these days.

Collector's Notes: New ships tend to be tougher to get and this one is no exception. As such, good hunting.

--Adam Pawlus


Day 1,510: March 29, 2011

Monday, March 28, 2011

Star Wars Figure of the Day: Day 1,509: R7-P7

R7-P7 Ahsoka Tano's Astromech Droid
The Clone Wars Basic Figure
Item No.:
Asst. 94736 No. 26374
Manufacturer: Hasbro
Number: #CW43
Includes: Stand, card, die
Action Feature: Hidden gadgets, removable third leg
Retail: $6.99
Availability: January 2011
Appearances: The Clone Wars

Bio: R7-A7 is Ahsoka's astromech droid. He joins her on many missions and provides navigational and technical support when Ahsoka flies her Jedi starfighter. Called "Arseven" by Ahsoka, the droid is her co-pilot during the mission to take out the Separatist blockade surrounding the planet Ryloth. (Taken from the figure's packaging.)

Image: In front of the "Dark Continent" Wall of Voodoo LP.

Commentary: It's been a while since we got Ahsoka's Jedi Starfighter, but Hasbro made good and gave us R7-A7 to fill the droid socket without making us wait too much longer! I'm thrilled-- I thought it'd be a few years before they cranked this one out. Using the 2008 R2-D2 body (as modified for the R3-S6 release), this figure has the same gadgets and gizmos you've become used to by now. Each of the side compartments pop open to reveal arms, and in the back is a tow cable which retracts when you twist the dome. It's a pretty amazing figure sculpt, and the original R2-D2 was one of my favorite molds of all time. This one is still excellent, and if you don't have any of the animated Astromech toys you really ought to get one-- this one or any of them. The maroon body and bright green details look fantastic, and it blends right in with Ahsoka's ship. I'd say be sure to get this one, but some of you don't love repaints so maybe you can live without it. But if you're a droid fan? You better get this one.

Collector's Notes: At press time there are two assortments with the wave containing most of the figures from this series-- R7-A7 only appears in one, while Obi-Wan, Cad Bane, and Hevy appear in both. As such, this guy is going to be harder to get.

--Adam Pawlus


Day 1,509: March 28, 2011

Friday, March 25, 2011

Star Wars Figure of the Day: Day 1,508: Luke Skywalker

LUKE SKYWALKER Battle at the Sarlacc Pit
The Legacy Collection Target Exclusive
Item No.:
Asst. 87931 No. 87798
Manufacturer: Hasbro
Number: n/a
Includes: Lightsaber, Sarlacc Pit, Skiff, 4 more figures
Action Feature: n/a
Retail: $62.99-$72.99
Availability: November 2008
Appearances: Return of the Jedi

Bio: Luke gives Jabba the Hutt one final wanring before he launches an escape using his powerful Jedi abilities. (Taken from the figure's packaging.)

Image: Adam's desk.

Commentary: I get a lot of people asking me what the worst figure ever made is. Well, it might be this Luke Skywalker. Some figures may have worse articulation, poorer accessories, or the inability to stand, but the deco on the head is so bad that nothing can compare. First, let's look at the skin-- Luke is so pale, he's basically translucent. The whites of his eyes blend right in to the plastic color, and a tiny blue dot and eyebrows so poorly painted on it's almost unreal make up the rest of the face. I can't fault the hair too much, but do I have to? This figure is based on the 2004 Jabba's Palace Luke Skywalker, a well-received figure which many (ok, I) feel that hasn't been matched in terms of the quality of this specific outfit. And here Hasbro reissues it so badly that it's probably the worst figure you can add to your collection. I've seen lots of knockoffs, bootlegs, and fan-pressed figures over the years and I assure you that none of them look quite their skin just may be able to glow in the dark. Luke here is special, plus he uses a pre-2001 style of lightsaber blade which ordinarily isn't a huge problem but it certainly doesn't help this release.

Sometimes it doesn't matter if a figure has a good sculpted costume, 14 points of articulation, or what may be a good likeness. Deco can make or break any toy, no matter the line, and this figure exists as the single greatest example that paint matters. The 12-inch collectors have, over the years, frequently repainted the 1990s Kenner head sculpts-- the ones we may not have loved-- and have proven that they are in fact good enough if you just apply the right coloring to them. Here, we have the finest example of Hasbro's factory phoning it in. If you've seen me rail on about how important paint and decoration can be, this is why-- this Luke figure has a good head sculpt, but you'd never know it if this was the only version of the mold you've ever bought. Some samples are better than others (I think mine may be unusually bad), but still-- good lord!

Collector's Notes: If you collect vehicles and playsets, it's entirely possible you will end up with this figure in your collection. It came with a Skiff and a Sarlacc Pit playset, and those things are generally worth your while. The figures that came with it... not so much. But hey, if you ever want to show your friends the worst Luke figure ever made, at least you know which one to get. The set still goes for more than $50, but it's not like you were going to buy it for the figures anyway.

--Adam Pawlus


Day 1,508: March 25, 2011

Thursday, March 24, 2011

Star Wars Figure of the Day: Day 1,507: Nikto Guard

NIKTO GUARD Puko Naga
The Clone Wars Toys "R" Us Exclusive
Item No.:
No. 21090
Manufacturer: Hasbro
Number: n/a
Includes: Blaster, rifle, stand, holster bag, card, die, hat
Action Feature: n/a
Retail: Gift with purchase or $9.99
Availability: Fall 2010
Appearances: The Clone Wars

Bio: Puko Naga is a Nikto guard in Jabba the Hutt's palace. With his fellow guards, he protects the crime lord from his many victims and disgruntled associates. Thousands of years ago, the Nikto swore their allegiance to the Hutts, and they still carry out this pledge by working as guards, warriors and henchmen for the Hutts. (Taken from the figure's cardback.)

Image: Adam's shelf.

Commentary: By now you probably know that this Nikto Guard was originally going to be part of a Battle Pack with Jabba the Hutt, but was removed due to costing reasons. That's why you have a figure in 2010 being sold for premium pricing and no knee or ankle joints. The detail is good, but the figure wasn't designed to do things like sit. WIth the legs as they are, you're probably just going to have this guy stand around and guard things. He has no problems holding on to his weapons, plus the removable hood allows you to get two of him and have him effectively be two very different looking action figures. I think he looks better without the hood, but that's me. While smooth, he does fit in to the animated line nicely and should be perfectly comfortable hanging out with your 2009 Jabba the Hutt Battle Pack, assuming you bought one of course. Jabba doesn't get a lot of thugs in the animated style, so I'd suggest picking up this one unless you want to reuse your Weequay pirates or Cad Bane... heck, that's not a bad idea.

Collector's Notes: It used to be that "gift with purchase" figures would get snapped up so fast you wouldn't even know they were there, but this one may actually still be available at your local Toys "R" Us. While the "free" part of the offer is long over, you can buy it and for the asking price I'd say it's decent enough to pick up. Odds are you won't see it reissued again because, clearly, the market hasn't dictated a need.

--Adam Pawlus


Day 1,507: March 24, 2011

Wednesday, March 23, 2011

Star Wars Figure of the Day: Day 1,506: Battle Droid

BATTLE DROIDS Red Variant, Shot
30th Anniversary Collection Saga Legends
Item No.:
Asst. 85770 No. 87340
Manufacturer: Hasbro
Number: n/a
Includes: Blaster, second figure, coin
Action Feature: Remove limbs and reassemble!
Retail: $6.99
Availability: Fall 2007
Appearances: Attack of the Clones

Bio: The Separatists utilize battle droids as their primary infantry forces. When assaulting strategically important worlds, these droid forces can be painted with special markings to help them blend into their environment. Though not individually a threat, attacking en masse these droids can become a formidable fighting force. (Taken from the figure's cardback.)

Image: Adam's kitchen.

Commentary: There's no shortage of these damned things. The Battle Droid mold with removable limbs was nicely exploited by Hasbro from 2006 to 2009, sold in pairs and giving fans a chance to build armies pretty cheaply. While not as astoundingly great as the mega-articulated 2-packs of today, these were pretty good for the time with decent deco and just enough movement to help flesh out your crowd scenes. They can stand, they can sit, they're pretty durable, and you can pull their arms out of their sockets when you've had a bad day. Unfortunately they can't bend at the elbows or knees, but, hey, that was OK when you got 2 figures for the price of 1 in 2007. While you may disagree, I think all these Battle Droid 2-packs are worthwhile just so you have a decent army of figures in your collection, but given how many days we've looked at figures together, maybe you don't need 32 varieties of Battle Droid in your own personal collection.

Collector's Notes: Most of these sets (with all the variations) flew under fans' radars, so none tend to be more popular despite being more or less common. The set can be had for about five bucks, which is easily worth it when you break down the guns, coins, and figures.

--Adam Pawlus


Day 1,506: March 23, 2011

Tuesday, March 22, 2011

Star Wars Figure of the Day: Day 1,505: Jodo Kast

JODO KAST Bounty Hunter
The Legacy/Vintage Collection Kmart Exclusive
Item No.:
No. 98396
Manufacturer: Hasbro
Number: n/a
Includes: Pistol, helmet, rifle, stand, rocket pack, game card
Action Feature: Removable helmet, working holster
Retail: $8.99
Availability: Fall 2010
Appearances: various Expanded Universe

Bio: In the comic "Boba Fett: Twin Engines of Destruction," Jodo Kast is a bounty hunter who wears Mandalorian armor. He pretends to be Boba Fett to take advantage of Fett's reputation as te galaxy's most notorious bounty hunter. However, the real Boba Fett is not flattered by Kast's impersonation and makes plans to stop him. (Taken from the figure's cardback.)

Image: Adam's kitchen.

Commentary: Since his debut in the late 1980s as a role-playing character, Jodo Kast hasn't got a lot of love in the toy world. The first one came out as a repaint in Fall of 2008, and it suffered the indignity of being based on a Boba Fett mold with an iffy action feature and a visible hole in the shoulder. Flash ahead to 2010 and Kmart gets a version that's clearly better but not necessarily perfect. Based on the awesome Boba Fett "evolutions" body, the figure gets a new head, a new paint job, and drops the cloth cape. The coloring is largely more realistic than the 2008 release, but a few elements seem to be a little more drab-- the red symbol on the chest is now black, and the dirt is missing. It actually looks more than a little like Llats Ward from a few years ago, but this new version is clearly Jodo. Why? Because the helmet comes off.

Jodo Kast didn't get a lot of face time, but the helmet did get popped off after Boba Fett beat the snot out of him and left him to die. This is a pretty good representation of the artwork in the book, minus the blood and freaked-out facial expression. If anything I would say it looks a smidgen like a blonde Guy Gardener, but with a slightly better hairstylist. What I like most about this figure-- aside from the fact that it really, honestly does look more like Jodo than the previous release-- is the way the body suit has multiple shades of grey. A little dry brushing goes a long way, and Hasbro managed to replicate the technique on a wide scale, giving Faux-ba Fett a slightly more expensive appearance. As I'm a sucker for armored figures, exclusives, bounty hunters, and 1980s Expanded Universe (Jodo debuted in a West End Games "Tatooine Manhunt" supplement) this is a automatic buy for me. I assume you'll want one, too.

Collector's Notes: When I first found Jodo, I was making a comment about how Kmart seems to be really bad about putting some toys on the right aisles-- and then I looked down at a pile of Littlest Pet Shop toys and found Jodo. The figure was slightly harder to get by virtue of being exclusive to the diminishing Kmart chain, but if you got out a little bit in the Fall of 2010 you could probably find a few of them. Unless you weren't near a Kmart, in which case, you're out of luck. Thankfully, his eBay price is only around $10, which isn't much more than he cost at retail in the first place.

--Adam Pawlus


Day 1,505: March 22, 2011

Monday, March 21, 2011

Star Wars Figure of the Day: Day 1,504: ARC Trooper (Blue)

ARC TROOPER ARC Troopers
The Clone Wars Battle Packs
Item No.:
Asst. 94743 No. 19682
Manufacturer: Hasbro
Number: n/a
Includes: Pistols, stand, rangefinder, pauldron, display stand, backpack, game card
Action Feature: n/a
Retail: $24.99
Availability: September 2010
Appearances: The Clone Wars

Bio: This Advanced Recon Commando served in the Grand Army of the Republic during the Clone Wars. He participated in a battle fought on the planet Kamino. (Stolen from Wookieepedia.)

Image: Adam's kitchen.

Commentary: This ARC Trooper doesn't have a name but is inspired by the armor which appeared in the two episodes which made up the season 3 premiere of The Clone Wars, largely because of the ROTS-styled helmet with the addition of ARC Trooper knickknacks on it. It seems like the design incorporates elements from many trooper variants, including the Revenge of the Sith 501st armor for color, the Sandtrooper for the pauldron, and a few other odds and ends for the squares on the chest (Corsucant Landing Platform troopers). As a design it's great, but as a character there's not much to him. The legs are recycled from the 2008 Clones, but everything else seems to have been altered just slightly for this set. The double-pauldron is particularly unique, and I really dig the helmet styling.

I'm not 100% sure if this character appeared on the show or not-- an ARC Trooper with very similar coloring appeared, but without a clearer shots I'm not certain. So for the time being, well, enjoy it for what it is-- a cool-looking figure with pretty good articulation. Other than the wrists, which only swivel it's just as good as any other Clone figure from the first few years of the line.

Collector's Notes: This set continues to perform well and it still ships from time to time. Don't hesitate to buy it if you see it, even though it has yet another version of Rex the other three figures are absolutely worth your while.

--Adam Pawlus


Day 1,504: March 21, 2011

Friday, March 18, 2011

Star Wars Figure of the Day: Day 1,503: Quinlan Vos

QUINLAN VOS includes Speederboard
The Clone Wars Basic Figures
Item No.:
Asst. 94736 No. 25277
Manufacturer: Hasbro
Number: n/a
Includes: Display base, card, die, lightsaber, speederboard
Action Feature: n/a
Retail: $6.99
Availability: November 2010
Appearances: The Clone Wars TV show

Bio: Quinlan Vos hunts for an escaped priosner. The rebellious Jedi teams up with Obi-Wan Kenobi to search for Ziro the Hutt, who has escaped from prison with the help of Cad Bane. Vos and Kenobi must get over their differences and work together if they hope to capture Ziro and Bane — and avoid an untimely end. (Taken from the figure's cardback.)

Image: Adam's desk.

Commentary: Not only does Quinlan Vos come from one of my favorite episodes of The Clone Wars, but he's also an excellent figure. The third toy of the character includes all the articulation you'd expect from a good Jedi figure, plus lateral joints on the hips-- so he can kick or ride his speederboard, for example. With cloth at the sides of his outfit, the movements aren't restricted either, proving that Hasbro can indeed put out an excellent toy figure that plays well in the real world. The figure looks a lot like his previous toys, combining elements of the traditional Jedi robes with some light armor from his homeworld. The yellow stripe and stubble make appearances on his face, which is framed by a mass of black hair. The detail is appropriately cartoony, and as the first (and so far, only) individually packaged version of Quinlan, fans of the Expanded Universe will probably want to pick this one up.

What makes the figure odd is his hoverboard. As of right now, this hasn't been showcased on the show, and while it does have a place to plug in a lightsaber it doesn't really fit with what we know about this character. If anything, the speederboard seems more like an original Hasbro concept for an Anakin Skywalker accessory but, again, I haven't seen it appear in the show so for all I know I'm way off base here. It's nice that we got a new accessory that doubles as a display stand, but unless there was a deleted scene or something, I can't be sure why it's here. It doesn't hurt the overall figure, which is excellent, so don't let anyone stop you from buying this one. It's one of Hasbro's better Jedi Knight figures, and were it not for the recently released Vintage Kit Fisto I'd probably say he was one of the best of the past year. (That new Kit Fisto is awesome.)

Collector's Notes: While still a little tough to get, Quinlan isn't impossible to find. I figure he will be hot eventually, so be sure to get him while you can. Without more appearances on the show, it's unlikely Hasbro will reissue him.

--Adam Pawlus


Day 1,503: March 18, 2011

Thursday, March 17, 2011

Star Wars Figure of the Day: Day 1,502: Kul Teska

KUL TESKA Separatist
The Clone Wars Toys "R" Us Exclusive
Item No.:
No. 98392
Manufacturer: Hasbro
Number: n/a
Includes: Display base, card, die
Action Feature: Rotating gun hand
Retail: $14.99
Availability: July 2010
Appearances: The Clone Wars: Republic Heroes video game

Bio: Kul Teska is a villainous Skakoan scientist working for the Separatists during the Clone Wars. Because his home planet of Skako has an extremely dense atmosphere, he wears a protective suit to survive in low-pressure environments on other worlds. His specially designed armored suit has integrated rocket launchers and concealed shoulder blasters. (Taken from the figure's packaging.)

Image: Adam's desk.

Commentary: Standing close to 6-inches tall, Kul Teska is a really bizarre figure in the grand scheme of Hasbro's Star Wars toy line. He was a character that online fans didn't really ask for (or recognize), he stands about 2-inches taller than Darth Vader, and he comes in very non-standard packaging. If you collect the animated line (and you should) this is one of very few figures that didn't appear on the TV show, but rather, was born from a video game that may or may not have performed well. (I picked up a copy for under $5, brand new, shortly after this figure came out.) Due to his unusual appearance and size I'd suggest tracking him down. Fact is, non-standard large Star Wars characters that aren't essentially monsters are very uncommon and generally speaking if it doesn't fit in a basic cardback, Hasbro generally won't make it. (There are exceptions for the occasional gift set, of course.) This guy is big, nasty, and looks like an extremely dangerous version of Wat Tambor. With articulated knees and numerous other body parts, it has a good range of movement that should help make you feel like you got your money's worth. For the price and size, this figure is comparable to Hasbro's larger Marvel Legends and Spider-Man toys. While not quite as articulated, it's still quite good and the detail is certainly present. The flip-open shoulder launchers and big gun hand are nice touches, and I'm pretty glad this toy got made-- even if I haven't played the game he came from as of yet.

If you haven't played the game, I'm currently in the midst of it (I waited until it got cheap) and he's a boss character. As of the end of the first meeting, he really isn't much more than a cookie-cutter bad guy but maybe he gets more interesting as the game goes.

Collector's Notes: This figure was sold individually in a window box at Toys "R" Us stores starting in July 2010. At press time, it's still possible to find him there. It's quite rare for Hasbro to make a figure from a new video game in a toy line aimed at the kids, so it's something of a miracle that this one got out to stores.

--Adam Pawlus


Day 1,502: March 17, 2011

Wednesday, March 16, 2011

Star Wars Figure of the Day: Day 1,501: Aqua Droid

AQUA DROID includes Retracting Head!
The Clone Wars Basic Figure
Item No.:
Asst. 94736 No. 28525
Manufacturer: Hasbro
Number: #CW46
Includes: Removable blaster attachment
Action Feature: Retractable head
Retail: $6.99
Availability: February 2011
Appearances: The Clone Wars

Bio: Aqua droids battle Obi-Wan Kenobi on Kamino. These underwater droids are part of a Separatist plan to destroy the facilities that supply the Republic with clone troopers. Their legs adjust for land or sea mode, becoming feet for ground missions or rotating into propulsion fins in the water. They have retracting heads to become streamlined for swimming underwater. (Taken form the figure's packaging.)

Image: Adam's kitchen. With some retouching.

Commentary: Generally when I crack open a figure, my opinion of it is pretty much firm within about ten minutes. With the Aqua Droid, I was initially hugely impressed by the details and features, but a day or two later I realized that the figure suffered from some structural problems which prevents me from calling it great. Why? Weak plastic.

The engineers behind this one went crazy, packing in gobs of articulation. Ball-jointed shoulders, a retractable head, feet that turn into rotors for swimming, and lots of other little details prove that this figure had a lot of great work put into it, much like the 2010 animated General Grievous, but it's plagued with a weak plastic, also like General Grievous. While Grievous was so rubbery that keeping him in good shape could prove quite the challenge, the Aqua Droid's main problems come from that he will collapse under his own weight in a matter of hours, or days-- depending on the climate. He can't stand, even with a display stand, as he'll start to sag courtesy of the plastic or his own joints turning against him. This has happened with numerous Separatist Droid figures since 2000, although it seems the early Episode I Battle Droids were spared this indignity.

In short: he faceplants, often, and this causes his removable gun weapon to misshapen. It's a shame because aside from this, I really like this figure-- the retractable head is fun, the colorful design is a nice change from tan or white warriors, and it just looks like a big, mean, evil water Cylon. If you're a carded figure collector, you should get this one with no reservations, but I think that the toy box or the toy shelf will not be kind to this one in the long run. I plan on buying a little doll stand for this one, so it alters where gravity tugs him down and should prevent long-term warping if I want him in a display environment. (Plus he might look more like he's swimming.)

Collector's Notes: This figure was one of several revealed at and held for Toy Fair, shipping from Hasbro days later. However, it seems he primarily shows up online right now, so you may not yet find him in stores. Our sample came from our sponsor, so as always please feel free to click below to buy it or other items to continue supporting this feature. (We appreciate it.)

--Adam Pawlus


Day 1,501: March 16, 2011

Tuesday, March 15, 2011

Star Wars Figure of the Day: Day 1,500: Pre Vizsla

PRE VIZSLA Mandalorian Warlord
The Clone Wars Basic Figures with Galactic Battle Game
Item No.:
Asst. 94736 No. 97560
Manufacturer: Hasbro
Number: #CW08
Includes: Cape, blasters, darksaber, jetpack, card, Galactic Battle Game die
Action Feature: Interchangeable Battle-Damage Parts
Retail: $6.99-$8.49
Availability: June 2010
Appearances: The Clone Wars

Bio: Pre Vizsla is governor of Concordia, the moon orbiting Mandalore. Vizsla appears to support peace and criticizes the Death Watch, a violent group of Mandalorians who want to return to their warrior past. But when Obi-Wan discovers the Vizsla is actually the leader of the Death Watch, the governor tries to silence the Jedi in a duel — darksaber to lightsaber. (Taken from the figure's packaging.)

Image: On a TV tray.

Commentary: Hasbro (and the animators of The Clone Wars) know how to get a lot of use out of a single model. The body of Pre Vizsla has been used to make multiple products, specifically Mandalorian Troopers packaged in three other products and counting! They've got good reason to reuse it, as they're all basically the same body and the sculpt is quite excellent. While some figures lost ankle joints in 2010, Hasbro added hip and wrist articulation so these figures could straddle a bike or better hold a gun with both hands. His holsters can store his blasters, and there's a head under the helmet too. Hasbro did a bang-up job on this one, plus it has a distinctive (and darker than necessary) paint job than the character on the cartoon. The detail is pretty good, and the figure is a little thinner than some other animated toys. It's nice. You should get it.

The accessories are pretty good too, and I was surprised to see how the black lightsaber turned out. Well, that's not true. On the show it's a super-black blade with a white aura around it, and the toy is basically a dark chunk of sunglasses lens with a handle. Nice touch. If you're looking for a decent figure with a lot of nice gear that plays well, this is it. Seriously, you should get one. Now.

Collector's Notes: This figure seemed to ship a lot but remained fairly tough to get-- that's the power of a popular figure in a line with kid appeal. It commands a slight premium over retail on eBay, so if you see it for seven or eight bucks just buy it.

--Adam Pawlus


Day 1,500: March 15, 2011

Monday, March 14, 2011

Star Wars Figure of the Day: Day 1,499: Commander Bacara

COMMANDER BACARA The Carded One
The Legacy Collection Basic Figures
Item No.:
Asst. 87535 No. 92528
Manufacturer: Hasbro
Number: #BD47
Includes: Blaster, droid part
Action Feature: n/a
Retail: $7.99
Availability: November 2009
Appearances: Revenge of the Sith

Bio: Commander Bacara is a clone commander under Ki-Adi-Mundi. He works alongside the Jedi General during the Clone Wars. The clone commander's loyalty to the Republic compels him to turn on his onetime comrade when Order 66 is enacted. (Taken from the figure's cardback.)

Image: On my desk.

Commentary: In 2005 Hasbro created a version of this figure with limited articulation and a quick-draw arm gimmick. Fans wanted a super-articulated version of the figure, and they got one... in an extremely rare Battle Pack in 2008. In 2009, Hasbro released a carded version of Commander Bacara with all-clean deco and his blaster on an individual card which, not surprisingly, sold really quickly.

The figure is actually just a parts-swap, the body is the 2003 Super Articulated Clone Trooper with the 2005 Bacara's shoulder armor, kama, and head. Simple-- heck, you could've made one of these yourself using clearance figures and five minutes of your time. The figure looks really good, despite being older parts it seems most fans didn't notice or didn't care-- they were just happy Hasbro released a version of Bacara with knees AND ankles for once. The clean carded version is probably the easiest one to get, but the battle damaged one from the Mygeeto Battle Pack is also pretty awesome. As Bacaras go this is the best figure to date, and odds are Hasbro has little reason to make a new one. It doesn't mean that they won't, but as of right now this is the best version you can buy.

Collector's Notes: A fast seller, and dang popular for a repack. Even more surprising, it's still pretty cheap-- under $10 on eBay, even less out of the packaging. You should get one.

--Adam Pawlus


Day 1,499: March 14, 2011

Friday, March 11, 2011

Star Wars Figure of the Day: Day 1,498: Padme Amidala

PADME AMIDALA Evolutions - Episode II
The Legacy Collection Evolutions
Item No.:
Asst. 87874 No. 87601
Manufacturer: Hasbro
Number: n/a
Includes: Additional figures, cloak, shawl, hood, blaster
Action Feature: n/a
Retail: $24.99
Availability: July 2008
Appearances: Attack of the Clones

Bio: Padme devoted her life to the people of Naboo and became a key figure in the dramatic events that changed the galaxy. Her courage and compassion deeply affected those around her, and was the pivotal legacy she gave to her children, Luke and Leia. While Queen of Naboo, Padme stood up against the Trade Federation’s siege of her planet. As a Senator, Padme fought to keep the Republic from falling into war. Her last act was to give birth to the twins who would fulfill her legacy by restoring peace to the galaxy. (Taken from the figure's cardback.)

Image: On my old desk.

Commentary: Hasbro cranked out a few versions of this Padme Amidala costume as a figure so far, this one is the most comprehensive and includes materials from a deleted scene. The hood and shawl are really the big-deal new parts, but it's also worth noting that the figure is a new super-articulated sculpt with a decent likeness. The white outfit isn't riddled with wrinkles, but has enough going on with it that it looks more like a real costume in a tiny size and less like a small plastic figure. With a working holster, it's pretty impressive and arguably one of the better Padme figures in recent years since it just isn't a girl in a dress that can't sit down. No, this one can be posed and actually looks pretty decent-- arguably the best of the Padme figures of this outfit so far, if not one of the best Natalie Portman toys you can buy of any kind. Easily worth tracking down, but if you're a betting man, you might see her at retail again some day. So don't overpay, but do track down.

Collector's Notes: A poor seller, this set could be had cheaply. As an added bonus, this figure was later sold individually on a regular retail card in The Legacy Collection.

--Adam Pawlus


Day 1,498: March 11, 2011

Thursday, March 10, 2011

Star Wars Figure of the Day: Day 1,497: Darth Maul

DARTH MAUL The Final Lightsaber Duel
Episode I VHS Tie-In
Item No.:
Asst. 84385 No. 84522
Manufacturer: Hasbro
Number: n/a
Includes: Red lightsaber, display stand, Obi-Wan Kenobi
Action Feature: Breaks apart at the torso, holds with a magnet
Retail: $14.99
Availability: Spring 2000
Appearances: The Phantom Menace

Bio: Darth Maul and his double-bladed lightsaber prove a fearsome challenge to Qui-Gon Jinn and Obi-Wan Kenobi as the trio battle it out in the Theed generator complex. With hopes for victory nearly gone, Obi-Wan leaps from the brink of certain death and uses his fallen master's weapon to cut the evil Sith Lord in two! (Taken from the set's packaging.)

Image: On my old desk.

Commentary: Hasbro has done so many versions of Darth Maul that, eventually, they all start to look alike. This figure has the rare distinction of having the same gimmick and pose as an individually carded figure releases just a few months later. The figure splits in two, and has a magnet in his torso. Each of these two figures have completely different sculpts, but they both seem designed to be effectively the same figure. With only six points of articulation, this figure really only can wow you in its ability to break in half. (Intentionally, I mean.) The detail and deco is really no better than any other Maul, but he is pretty cool in that his head can actually tilt back a bit. I think that's a big plus.

I would not suggest tracking down this 2-pack, which also includes Obi-Wan Kenobi, unless you gotta have everything. It's not that the figures are bad, it's just that there are so many versions of these characters that you won't find these to be particularly remarkable.

Collector's Notes: This set was a pretty good tie-in to the home video release of the first prequel, but, well, not so hard to get it.

--Adam Pawlus


Day 1,497: March 10, 2011

Wednesday, March 9, 2011

Star Wars Figure of the Day: Day 1,496: John Branon

JOHN D. BRANON Rebel Pilots III III
The Legacy Collection Wal-Mart Exclusive Evolutions
Item No.:
Asst. 87874 No. 91508
Manufacturer: Hasbro
Number: n/a
Includes: Blaster, helmet
Action Feature: n/a
Retail: $12.96-$24.96
Availability: August 2009
Appearances: Star Wars

Bio: Rebel Alliance fighter pilots have a legacy of bravery that ultimately carries them to victory against the Imperial forces of the Galactic Empire. John D. Branon ("Red Four") flies in Red Squadron at the Battle of Yavin, losing his life in the attack on the Death Star. Shira Brie joins Rogue Squadron after the Battle of Hoth and gains the trust of her fellow pilots. Jake Farrell pilots an A-Wing at the Battle of Endor and celebrates the end of the evil empire. (Taken from the figure's packaging.)

Image: On my old desk.

Commentary: You probably didn't know you wanted a John Branon figure. The pilot is one of the many not-quite-but-may-as-well-be nameless heroes in the saga, and I'd say most fans probably have no idea which movie he was in until they bought the figure and read the box or did the research. Based off a retooled version of an X-Wing Luke figure, John uses the same basic body you also saw with Wedge Antilles and Nrin Vakil. The only truly new elements are the head and the helmet deco, and the head looks so much like Wedge that if they just reused it, odds are there wouldn't be too many complaints. While the figure doesn't break any new ground, it is another Rebel Pilot and it does indeed have a distinctive helmet.

It's a shame that a figure like this-- which has a very nice head sculpt and a nifty red painted helmet-- doesn't warrant more commentary. I'm actually reaching here trying to figure out how I can tell you that this is or is not a good figure. It's certainly not bad, but like so many figures in the line there's a "samey" element that you really can't ignore. If you need a lot of pilots, get it. Otherwise? Well, this set is probably mostly just going to appeal to people (who are me) that got it because they were crazy about getting a Shira Brie figure.

Collector's Notes: This set was eventually dumped at Ross stores due to poor overall sales of the assortment.

--Adam Pawlus


Day 1,496: March 9, 2011

Tuesday, March 8, 2011

Star Wars Figure of the Day: Day 1,495: Battle Droid

BATTLE DROIDS Tan Clean, packed with Dirty Droid
30th Anniversary Collection Saga Legends Basic Figures
Item No.:
Asst. 85770 No. 87340
Manufacturer: Hasbro
Number: n/a
Includes: Blaster, second figure, coin
Action Feature: Remove limbs and reassemble!
Retail: $6.99
Availability: Fall 2007
Appearances: The Phantom Menace

Bio: The Separatists utilize battle droids as their primary infantry forces. When assaulting strategically important worlds, these droid forces can be painted with special markings to help them blend into their environment. Though not individually a threat, attacking en masse these droids can become a formidable fighting force. (Taken from the figure's cardback.)

Image: On my old desk.

Commentary: Other than Clones or maybe the R4-G9 mold, Hasbro probably got the most variety out of this Battle Droid mold. Starting life in 2002 as an accessory to a deluxe C-3PO set, these figures have been retooled and repainted so many times it'd make your head fly right off. By an astonishing coincidence, you actually can rip this figure's head off, and its arms, legs, and backpack. Now released in a more subdued color, this figure has very limited deco compared to most of the others. There is some black around the joints, a little silver here and there, and some dirt on the lower legs. It's simple, and really all you need to make the most out of a figure that will most likely be diorama fodder-- possibly dismembered-- in your toy box. As toys they may not be too impressive, but for the price army builders would have a hard time doing much better than these.

Collector's Notes: This set was one of the last "30th Anniversary" Saga Legends Battle Droid variants.

--Adam Pawlus


Day 1,495: March 8, 2011

Monday, March 7, 2011

Star Wars Figure of the Day: Day 1,494: Clone Trooper

CLONE TROOPER Phase 1
The Vintage Collection Basic Figures
Item No.:
Asst. 97568 No. 28437
Manufacturer: Hasbro
Number: VC45
Includes: Pistol, rifle, helmet
Action Feature: n/a
Retail: $7.99-$10.99
Availability: February 2011
Appearances: Attack of the Clones

Bio: Celebrate the legendary Star Wars saga that changed the universe forever! This collection brings to life the incredible story of good versus evil that captured our imagination and took us to a galaxy far, far away. Iconic Star Wars heroes and villains are captured with incredible detail and premium features to commemorate each epic tale in the Star Wars saga. May the Fore be with you! (Taken from the figure's packaging. There is no bio.)

Image: On Adam's desk.

Commentary: Back in 2003, the release of the Super Articulated Clone Trooper ushered in our current age (and present expectations) for Star Wars action figure-- we expected 14 points of articulation and fantastic detail, and nothing less would do. Over the years, this then-perfect figure was revealed to be a little bit chunky but we still loved it and Hasbro didn't see much need to redeo it. Cut to today, the new 2011 version of this Clone is shipping from Hasbro as you read this (pre-order/order at a link below and I get a shiny nickel) and it really does look significantly better than previous releases. How much better? I'll go on a limb and say this figure, complete with its removable helmet, is so perfect that even I can't complain that the helmet is too big. Everything just works here.

The proportions remind me of a maquette in the Star Wars Chronicles prequel book, with very angular pectoral armor, a thinner build, and a wider mouth on the helmet. The details are crisper, he doesn't look at all blaoted, and he may be a little taller than usual-- he's certainly a smidgen taller than your average Clone Wars trooper figure.

Deco is, as usual, good. It's hard to really mess up, but having said that Hasbro did ignore a couple of minor details. The little grilles on the sides of the helmet (clearly visible in the cardback photo) were left off, the soles of the shoes were left unpainted (arguably not at all important), and it looks like some material is exposed around the ankles, instead of just being basically sealed armor. (This is not a big deal.) I figure Hasbro will correct the helmet lines if they haven't already, as fans will probably start mentioning it after they see the figure, so I'm predicting it now: let's expect a running change on this one. The really big surprise is that they added deco on his guns, so there are little silver details painted on both the rifle and the pistol, plus some bronze on the pistol. As far as his accessories go, this is really exceptional decoration.

So the sculpt is great, the deco is acceptable, but how about that articulation? You'll be impressed, I think. Not only does it have the traditional 14 points of articulation, complete with pivoting waist, but this figure also incorporates ball-jointed hips so well you might not realize that they're even there at first. Bending wrists were also included, and the joints are extremely well-hidden so you, again, might not notice those either. The shoulder armor now hides the "articulation rings," meaning that you can't have the arms stick out straight to the sides any more. I think I'm OK with that. The end result places a slight restriction on some movement, but it looks a heck of a lot nicer and can still assume pretty much any pose I would want from the figure.

Packaging Notes: Like many of the 2011 figures, the cardback data focusing on the "original" Clone Trooper is incorrect-- this time, it shows a figure that never saw release. The 2002 Red Clone Trooper packaging is shown with an all-white Clone Trooper inside, and was said to have been released in 2002-2004. The pictured figure-- and not with those accessories, or in that packaging-- did make it out as a Wal-Mart exclusive in 2003. Having said that, the very first Clone Trooper was actually the Sneak Preview figure from early 2002, and that came on a green Power of the Jedi-inspired package. In case anyone at Hasbro hires freelance copy editors: I've done a lot of catalog work, I'm pretty cheap to hire, and I'm a nitpicky pain in the neck.

Collector's Notes: This one appears to be shipping in Vintage Waves 6 and 7, and I'll go out on a limb and assume it'll be shipping in waves 8, 9, and 10 too. Even if you have a complete army, you're still going to want this one as well as repaints of this one. Hasbro did a really good job here, so if fans are paying attention to quality, it should be in short supply for a while.

--Adam Pawlus


Day 1,494: March 7, 2011

Friday, March 4, 2011

Star Wars Figure of the Day: Day 1,493: Clone Trooper

CLONE TROOPER with Freeco Speeder
The Clone Wars Vehicles with Figures
Item No.:
Asst. 94737 No. 20794
Manufacturer: Hasbro
Number: n/a
Includes: Freeco Speeder, blaster rifle, helmet, backpack, shoulder pads, game stand and card
Action Feature: n/a
Retail: $16.99
Availability: November 2010
Appearances: The Clone Wars

Bio: A clone trooper rides a Freeco bike on the frozen world of Orto Plutonia. The bike's windscreen shields the driver from wind and snow, and cold weather gear further protects the trooper from the harsh environment. The bike's speed and maneuverability are pushed to their limits when the native Talz launch an attack to defend their homeworld. (Taken from the figure's packaging.)

Image: A G.I. Joe box insert. We use all parts of the buffalo here.

Commentary: While this figure may seem like a repack of the snow Captain Rex, it ain't. No, this Clone Trooper is a repaint of the Flamethrower Clone Trooper, which was a retooled version of Rex. (I can see why you would be confused.) This clone is decorated very similarly to the captain, but with fewer stripes and flourishes. The helmet has a concept art-inspired red triangle on it, plus the Rex-specific deco has been removed for this rank-and-file figure. The most notable change is the kama, rather than a plastic one, it's cloth-- so the figure can actually sit, which is important given he comes with a vehicle. (The cloth piece was introduced with the Flamethrower Clone.)

Sculpted and painted detail are good, with the body suit getting a nice brushing that makes it look like it has some snow stuck to it. The blue stripes are much cleaner than Rex', although the visor on this figure seems a little sloppy around the top. (It's probably just my sample.) Aside from the lack of ankle joints, the figure has about as much articulation as you might expect from your average Clone Trooper. Heck, you might think I had nothing to complain about-- and you would be wrong. Much like a few (very few) figures in the past year, this one has removable shoulder armor which is pegged in. This allows the figure to keep a certain look while not reducing mobility. The problem with this is that these are small, easily lost or potentially snapped-off pieces that don't seem like they would really hold up to kid play over time. For a collector figure, it looks nice, but like so many figures in The Clone Wars I'm left not believing the company line about this series of action figures being designed with boys ages 4-11 in mind. This is a flourish for the old guys, or, more likely, something a kid would try to eat.

The overall package is good, but not anything mind-blowing. If you missed Snow Rex or the Freeco Speeder previously, this can kill two birds with one stone at a reasonable price.

Collector's Notes: The set hit late in 2010 and seems to be fairly easy to come across if you do a little hunting. Don't pay a huge premium, but I will say this-- the figure is worth the $6 or $7, and the vehicle is nice enough to warrant about $10 on its own. You won't feel cheated at (or slightly above) regular retail. Also, be sure to pivot the head forward a bit-- the backpack will not stay on if the back of the helmet is at all in the way.

Vehicle Notes: The speeder itself is essentially the same as the version which came with Obi-Wan Kenobi, so odds are you'll just be buying this one for the figure. The clone fits inside, but you have to remove his backpack first and there really isn't any room to store his blaster.

--Adam Pawlus


Day 1,493: March 4, 2011

Thursday, March 3, 2011

Star Wars Figure of the Day: Day 1,492: Luke Skywalker

LUKE SKYWALKER Jedi Legacy
30th Anniversary Collection Evolutions Figures
Item No.:
Asst. 87480 No. 87562
Manufacturer: Hasbro
Number: n/a
Includes: Lightsaber, additional figures
Action Feature: n/a
Retail: $19.99-$25.99
Availability: February 2008
Appearances: Legacy Novels

Bio: Luke Skywalker was a legendary war hero and Jedi who helped defeat the Galactic Empire and helped found the New Republic, as well as the New Jedi Order. (Stolen from Wookieepedia.)

Image: Adam Pawlus' Playmobil Africa set. The clearance racks are good to me.

Commentary: Hasbro knows there are only so many versions of Luke Skywalker you can sell before plumbing the books and comics, which is why in 2008 we got this version. A version which, I must confess, I am not totally familiar with as there isn't a lot of art from the Legacy-era novels. The outfit and weapon were the subject of some debate, as Luke rarely wore a lot of bright colors, and his lightsaber didn't quite match what we usually saw-- specifically, the same one he used in Return of the Jedi. No, this release had a hilt similar to the first two films, and a green blade. There may be some story behind this but, again, this is a detail I'm not all familiar with here. Like most Evolutions figures, Luke is all-new parts and has the full range of 14 points of articulation which was, and essentially remains, the high standard of most figures out of the company these days.

The interesting thing here is that Hasbro effectively aged Luke about 20 years. His hair color is a little different, his skin is a little more wrinkly, and his expression is a bit more stern. Granted, most Luke figures look pretty serious, but this one seems to be gunning for "grimmer" from the get-go. The hard plastic used for his robes have a little give in them, but it's pretty obvious this figure was not meant to sit or be posed at any extreme angles-- this one was meant to stand around or be left in the package. With his arm articulation, you could have him fighting Lumiya or Jacen Solo if you'd like, or perhaps squaring off with Boba Fett in some hypothetical grudge match. While not essential to fans of the films, this one might appeal to people who would play with their toys, or adore the Expanded Universe. For a segment that fans lament gets no respect, the EU has an astonishingly large segment of figures made from it. (There's a lot of source material, but still, compare it to The Phantom Menace or something.)

Collector's Notes: This was a body that saw some reuse. In 2009, it was repainted and given a new head, sold as Joclad Danva. In 2010, the body was reused (and given new hands) for an unnamed Rodian Jedi Knight action figure. This boxed set was available in both 2008 "30th Anniversary Collection" packaging as well as "The Legacy Collection" packaging, neither of which is worth more just yet. The figure by itself sells for about $5, and the boxed set should be had for $15 or less these days. There aren't too many figures meant to be from the later New Jedi Order books or the various Legacy novels, but this one made the cut-- so if you enjoyed those, be sure to pick up the figure or the set.

--Adam Pawlus


Day 1,492: March 3, 2011

Wednesday, March 2, 2011

Star Wars Figure of the Day: Day 1,491: Blackhole Stormtrooper

BLACKHOLE STORMTROOPER and Blackhole
The Legacy Collection Comic Packs Wave 7
Item No.:
Asst. 87504 No. 89780
Manufacturer: Hasbro
Number: #13
Includes: Blackhole "figure," torture droid, blaster, smoke stand
Action Feature: n/a
Retail: $14.99
Availability: March 2010
Appearances: Star Wars newspaper strips

Bio: Shadow stormtroopers capture Luke Skywalker and Princess Leia on Vorzyd V. The Rebels are on the planet, also known as the Gambler's World, to stop the evil Empire's main source of income. After kidnapping the Rebels, the stormtroopers speak with Blackhole, the Imperial Intelligence Director, who orders the prisoners interrogated by an IT-O Droid. (Taken from the figure's packaging.)

Image: Adam Pawlus' former apartment's back yard.

Commentary: Hasbro made a killing repainting Clone Troopers so it only makes sense they applied it to Blackhole Stormtroopers, the first-ever major paint variant on the standard armor to be seen outside the films. The figure is, sadly, not painted at all like in the comics where the trooper had black armor and very distinctive silver lenses-- so really, the authentic version of a Blackhole Stormtrooper (as represented by Funko, Gentle Giant, and other licensors) has yet to make it out in any form from Hasbro. It's more of a dark blue color, with blue lenses and a removable helmet-- presumably since that was the mold available to Hasbro's factory, the characters in the comics left their helmets on.

The base figure is the 2007 Stormtrooper, which was based on the 2004 Vintage Stormtrooper but with a new head, helmet, and torso. This is a nice figure and a neat set, but ultimately you may find it more irritating than fun-- basically for $15, you get a trooper and two very large accessories in the form of Blackhole and a torture droid. It's a little expensive for what you got at retail-- it's still a neat curiosity and one of very, very few figure packs made after the newspaper comic strips.

Collector's Notes: This set came and went really fast, but its secondary market value remains on the low side, close to retail. It was meant to be a 2009 release, but only one "2009"-style packaging wave of comic packs made it out in all of 2009. This set was seen briefly online at etailers as well as in physical Target stores, plus there were a few odd sightings elsewhere. This was part of the final wave of these figures to hit the mass market, and the 87504 SKU was pretty miserably managed by stores and Hasbro over its 3-year run. Basic figures get a new number to flush out old product-- so do Battle Packs and vehicles-- but comic packs were stuck with the same number, effectively telling stores that these were the same things for several years rather than rebooting every 12-18 months.

--Adam Pawlus


Day 1,491: March 2, 2011